Forum Replies Created
-
Posts
-
Re: Servis constant filling and pumping
Yes. Think it is going to be a expensive repair. Thanks for your help.
Re: Servis constant filling and pumping
Thanks for your help.
I did tilt the machine forwards onto the front door side but not as much as 45 deggree.
Have checked the pressure switch, no water in it, when blown into can hear switch work. Little bit of water drained from pipe when layed to floor level. Can blow down it with no blockage.
Soleoids hav no swellings. They open when starting,stay open with pump emptying, when cycle selector put to off solenoids close but not until pump emptied out.
Old blocked pump windings were burnt, new ones still ok.
Am sure I replaced 2 wires on pump as they were. Could they cause this problem if reversed ???
