[SteveFitz]

Hi Dave

Thanks for the speedy response, I did check for flooding as a matter of course but all looked clean and dry?

Steve

[SteveFitz]

Re: Maidaid C511P (916511)

Hi Dave

I will strip out the recirc pump and check for any obstructions, the arms I know are clear. I’ve been reluctant to do that to press as I’ve always seen it running as it should. The drain pump is clear I’ve had that off already plus it comes out with some very good volume and empties in seconds. I’ll let you know if i have any joy!

Steve

[SteveFitz]

Re: Maidaid C511P (916511)

Hi Dave

Thanks for the quick response much appreciated, you are right in that the machine has two heaters but both of them are operating fine you’re also correct in that the machine wont operate until it reaches temperature which takes about 45 mins from cold and then stalls between use until it once again reaches temperature which it indicates on the display with a series green bars. It does everything you would expect of it some of the time then others its been reported the temperature is not hot enough and therefore leaving things wet, the spray arm doesn’t rotate until seconds before end of cycle and the end of day drain cycle wont complete first time (which I have witnessed).

Steve

[SteveFitz]

Re: Smeg A2-2 Wiring Diagram

Thank you very much for your help Alan it is very much appreciated.

Steve

[SteveFitz]

Re: Stoves 1000DF (444445371)

Lawrence you are the man!!

Much appreciated, Thank you very much

[SteveFitz]

Re: Stoves 1000DF (444445371)

Appreciate any help with this one guys.

Many Thanks
Steve

[SteveFitz]

Re: BEKO BC73F OVER FREEZING

Thank Dave much appreciated

I have received the sensor change info thanks, I had seen this before wasn’t convinced it applied to this model though as i couldn’t find anything to back it up?

I need to drag this thing out has there are no other identity/serial marks on front of appliance.

Thanks again
Steve

[SteveFitz]

Re: Flavel/Leisure cooker ML10FRS

Hi Dave

Do you still have a copy of this wiring diagram? my customer has removed the grill oven switch without making a note of wiring, i have managed to get it working but the diode is lit permanently.

Cheers

Steve

[Author]

Posts