[steveredfearn]

Re: bosch dishwasher fault

Thankyou both very much the problem is now sorted. It turned out the rinse aid arrow was turned to zero! how this happened i do not know.
Thanks again and have a great christmas!
Steve

[steveredfearn]

Re: Bosch 1200 EXPRESS CLASSIXX WF02467GB OVERHEAT

Well actually it read 4.4on the 200k setting.

[steveredfearn]

Re: Bosch 1200 EXPRESS CLASSIXX WF02467GB OVERHEAT

Hi there Martin

Finally, after the washing machine seemed to right itself, the problem recurred. I managed to extract the thermistor, turn the ohms to 200k and across the terminals got a 4.0 ohm reading.
Just for the sake of it i put the meter on the same setting across the heating element and got a 0.0 reading dont know if that is ok or not.

The thermistor has white calification on it too dont know if that means anything.

Your advice would be most welcome once again!

Cheers
Steve

[steveredfearn]

Re: Bosch 1200 EXPRESS CLASSIXX WF02467GB OVERHEAT

Thanks. From what I gather I need to take off the front panel of the machine. I will do this tommorrow. When you say the heater boss I assume you mean the heater element?

Cheers
Steve

[steveredfearn]

Re: Bosch 1200 EXPRESS CLASSIXX WF02467GB OVERHEAT

Thanks again Martin. The ohms settings on my multimeter are as follows; 2000k, 200k, 2000, and 200. Which setting should I select and what should the reading be please? I am assuming the power needs to be switched off.

[steveredfearn]

Re: Bosch 1200 EXPRESS CLASSIXX WF02467GB OVERHEAT

Hi Martin
Thanks very much for your reply. The delay in my reply is due to me buying a digital multimeter. The maching is intermittently showing the same fault in the meantime.
i am an electrical novice pretty much. My next question then is how to perform the thermistor check and whereon the machine is it please?
oh and what does NTC mean please?

Thanks again
Steve

[Author]

Posts