[stevieag]

Re: ACA9102 Bottom Arm Not Rotating

right

im confused
i presumed that a solenoid would normally be closed and also fail closed

this i would presume right if its failed that i now get only top spin as lower in shut off BUT
i have measured voltage at pcb at the 1/2 value output. on full load i get 2v at 1/2 load i get 240v?
this is confusing as id expect current to open the valve for normal wash not close for 1/2

😕

still not sure, if pcb or solenoid

[stevieag]

Re: ACA9102 Bottom Arm Not Rotating

Thanks

1/2 load isnt selected and does light when pressed

the solonoid? i have seen it but not done anything with it (worth a change? are they expensive)
i dont envy anyone that works on diskwashers for a living…. you need the hands of a baby on arms of an octopus. everything need taking apart to do minor repairs.

im at a loss now 🙁

[stevieag]

Re: ACA9102 Bottom Arm Not Rotating

Thanks for your advice

i have had the unit in pieces today trying to find a reason

i have cleaned the arm, the filters but no joy?

The arm spins freely.

Has anybody any ideas i can try? or come across this before?

[Author]

Posts