Forum Replies Created
-
Posts
-
Re: Bosch W/M motor not working ENR WFF2000 GB/12 FD 7709 01
Ridiculous price. Not worth fixing as due to the age of the machine the timer/motor control board might be next, or the drum bearings etc…
might as well just by cheap crap every 2-3 years
Re: HELP! Bosch WFF2000 W/M motor not working
just checked brushes and tested again – same results
i guess a visit to the sales is in order 🙁
thanks
Jon
Re: HELP! Bosch WFF2000 W/M motor not working
2-3 showing approx 2ohms
4-5 no circuit
6-7 15 ohms (enough to stop the audible continuity confirmation – whoops)Re: HELP! Bosch WFF2000 W/M motor not working
just done the continuity check…
the connector block shows pin numbers 1 thru 8 (with 1 and 8 pins missing). The only continuous circuit is thru pins 2 & 3, nothing else. 🙁
Thanks for your help anyway.
Re: HELP! Bosch WFF2000 W/M motor not working
I haven’t checked the circuits yet as I’d put the motor back in the machine and replaced the back-panel, but is it really not possible to replace a fuse in the motor? A replacement motor is nearly as much as a new bottom-end machine 🙁
Re: HELP! Bosch WFF2000 W/M motor not working
There’s 5 or 6 pins in the connector block – do you know which I should use to test? also, if it is the fuse is it easy to get at or does the motor case have to be separated (i did notice a couple of TorX screws but I’ve no idea what they release.
Thanks in advance.
