[stuffed]

Re: hotpoint dwf61p – circulation pump slow

holding fire on the impellor for the moment,
as I have already rebuilt existing – it basically a domestic heating pump impellor. only meant to be temporary job tho, and all is nearly fine except timing as shown on display . originally after fault whatever program selected – it said ( apart from cold prewash) 2hrs to go. now quick wash says 29 mins to go ( as it used to before fault), is the machine clever, ie is it learning as it goes .

PS as a heating engineer i have to take boilers and sometimes houses apart to fit things and its a damm site easier than this – my hats off to you if you do it for a living

[stuffed]

Re: hotpoint dwf61p – circulation pump slow

nos i have are
dwf61p/07
79700434
fd80093023type 59e71h
1000710220898390233

[stuffed]

Re: hotpoint dwf61p – circulation pump slow

the no on motor is 5600.031929 / isol.kl.f / mo1757/230-240v does that look right

[stuffed]

Re: hotpoint dwf61p – circulation pump slow

stripped pump down and checked motor- thats ok , however white seven bladed rotor is very worn, with no points to physically connect it to blue plastic drive- can i get just this rotor

[Author]

Posts