Forum Replies Created
-
Posts
-
Re: Hotpoint LFT114 error code 2
Yeah I know its a crappy machine. I just dont want to spend the new years eve dishwashing by hand. Anyway I opened the circulation pump. I could see a lot of food and detergent debris but it could spin by hand. Cleaned it up and started a full circle. It works fine till now although the error E2 still remains when in self test procedure. Lets hope its a glitch of the software…
Re: hotpoint ariston lft 114 looks dead
actually it says.
Washing Electro-pump
1. Turn the machine upside-down.
2. Unhook the basket
3. Unhook the floating-ball
4. Unfasten the tape using pliers
……
……Anyway I just blew to the small pipe to the pressostat, obviously water was blocking it and now it works fine.
Re: hotpoint ariston lft 114 looks dead
actually i think (not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}, but almost sure) that the manual was saying to do it in order to change the heating element
Re: hotpoint ariston lft 114 looks dead
Hello again. Sorry to bother you but i am really confused. I changed a resistror which was burn at the pcb, changed the heating element which had rust (both with a “friend’s” help) and all worked fine untill i placed the dishwaser into the cabinet and it shows me an error about the pressostat. Before I put it all together the self test was working perfect. Just when I screw the dishwasher and placed it the problem occured and the error code is LED 1 and 3 flashing. Is there a possibility that the error is caused because the machine was upside down for 3-4 days? I mean it was emply of water and maybe air was gone somewhere in the pipes? Dont know, my knowledge about plumbing is not that good.
Re: hotpoint ariston lft 114 looks dead
well i know its an indesit crap! If it was in my hand I would go for a bosch or at least pitsos (bosch-siemens-pitsos group). But it came to me as a present buyed in Italy. What made me nearvous and desided to try fix it on my own was that I called the service of indesit in Athens and the technitian just came, saw it and said: “yeah you are right, its not working. we have to take it to the service”. (you must be kidding! its not working??? I just invited you for a coffee!) He didnt even see if it was fused in my house fuse! and took me 40 euros 🙁
