[summer]

Re: Smeg cooker SUK92MFX5 problem

Hello, I got this from an older post – think its what you’re looking for (so am I!) My model was bought in Sept 2004…Yours?

———————

Well a big thanks to this site for supplying the element for a great price and quickly.

The great news is that I received the element and it is now replaced and working fine.

The procedure was very straight forward.

At the back of the oven there are two bolts that can be unscrewed by hand/pliers or large screw driver (whatever it takes )

Then slide out the metal piece covering the back panel. It will come out very easily. You will then see the element. It is screwed in with three screws (standard sized) undo these and it will then allow the element to move slightly, don’t pull it hard, it’s attached to the wires with blade connectors. These come through a small slot in the back. Mine was connected as follows.

LEFT
|—Orange & white on the left most connector
|—
|
|—Green & yellow on the middle connector
|
|—Solid blue on the right side of the middle
|—Blue & white on the very right hand side
RIGHT

Remove the connectors carefully checking if they match what I describe, if not note them down to be safe, don’t want any surprises

Then just attach the new one and then reassemble by doing the above steps in reverse.

By the way some how the alarm has come back to full volume no idea how but just loving it!!

This was a very simple job; it was done from the front and does not require any special skills. In my view these instructions should be included with the element. Anyone can do it.

[Author]

Posts