Forum Replies Created
-
AuthorPosts
-
April 8, 2017 at 10:24 am in reply to: Bosch WVD2452SGB – Washer/Dryer – Dispenser to drum pipe #446685
superpacman1972
ParticipantRe: Bosch WVD2452SGB – Washer/Dryer – Dispenser to drum pipe
Thanks, just took the top off and water dispenser to get better access. I cannot seem to get the pipe on without the plastic either falling into the drum (I was lucky and managed to fish it out with a toothpick from inside) or popping up into the pipe.
If it’s the case this is factory fitted from inside the drum, I’m going to have to strip down to the drum, unless there’s a way I can plug it in somehow by poking through the drain holes of the drum.
A job for another day me thinks, may even be tip time for it, unless anyone has an easy hack to reattach this pipe.
Thanks again.
August 20, 2007 at 5:48 pm in reply to: Hoover Quatro System 1300 AKA WS136-00 – Psycho Spinning #225207superpacman1972
ParticipantRe: Hoover Quatro System 1300 AKA WS136-00 – Psycho Spinning
Ok, thanks for that. I was about to arrange a call out visit as Tacho Generators lie outside of the boundaries of my technical comfort zone. 🙂
But the psycho tendancies of the machine seem to have stopped now. The motor speed and rotation are now as expected. The motor noise also seems to have stopped, arc sparks gone, as has the burning smell. Had it running for 30+ mins and everything seems to be normal. Might have been because I cleaned the motor or something, I don’t know.
The final drain outlet pump is still making a bit of racket, but the motor now appears fine. I feel confident enough to deal with one, but thanks for your swift advice. 🙂
-
AuthorPosts
