[Swervin]

Re: Rosieres 4040DB Hinge replacement

I guess that’s a no then!

Parts have now arrived so I’m going to have to figure it out for myself it seems. I can get the central panel loose at the bottom, as there are 4 screws there that area easily accessed. However, that central panel then seems to pass up into the front of the oven at the top.

I found an old post on here where someone’s suggested going in through a hole int he chassis leg and hoiking the receiver up into place with some wire, but it looks like the hole would need bending to get the receiver through it which doesn’t seem ideal.

Access to the one on the side is fairly straightforward so I can get 75{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the job done fairly easily.

[Swervin]

Re: How to prgram an Electrolux/Zanussi PCB

Ahhh. Thanks for clarification Penguin. 🙂

All I’ll say is I can recommend howtomendit.com. 😉

[Swervin]

??

[Swervin]

Sorted. Isn’t the ‘net a great thing?

[Swervin]

Yep.

[Swervin]

Re: How to prgram an Electrolux/Zanussi PCB

South Manchester helo. Just off the M56.

[Swervin]

In that case does anyone know any engineers that can?

I’ve read elsewhere that you can program them by using the control panel buttons and sending it into service mode but it wasn’t too clear.

[Author]

Posts