[T0rNaDo69]

Re: White Knight tumble dryer – no heat

i can understand that for saftey reasons.

though im not likely to touch the spining blower or the hot element.

well it doesnt matter if you have it on high heat or low heat.
only one of the eight element springs heat up..

at a bit of a loss on this..
could it be the hi and low switch
is it the element
or something on a PCB if it has one

[T0rNaDo69]

Re: White Knight tumble dryer – no heat

right i checked the back of the dryer and found the code.

0312 767 15003/1

so that puts it in this manual.
0312_767_15002_15003_&_variants

im going to test run it without the back cover on to see if the element heats up on both low and high settings.

as both thermostats test ok ?
so cant see what else it would be.

[T0rNaDo69]

Re: White Knight tumble dryer – no heat

ok cheers for the link.
i will have to take a photo of the machine and see if i can match it with one of those six..

[T0rNaDo69]

Re: White Knight tumble dryer – no heat

iadom wrote:
Like lots of things in life, looks aren’t everything. Have you tested the heater for resistance/conminuity?

hi iadom. yes i did test the element and it was fine.

[Author]

Posts