[teamsmiffy]

Re: Belling IDW604 thermostat switch defective?

Thanks for your help.

I’ve already changed that, so perhaps it’s time for a new machine.

[teamsmiffy]

Re: Belling IDW604 thermostat switch defective?

The product code is 444445898 It was purchased in June 2008, so it’s lasted quite well.

http://sandbox.smith-it.co.uk/?p=6313

[teamsmiffy]

Re: Belling IDW604 thermostat switch defective?

Thanks Seamy, is the Thermistor the same as the “Sensor Thermal Limiter” or is this a different component?

These are the only parts that seem to be available, and ive installed a new thermal limiter already.

http://www.partmaster.co.uk/dishwasher/ … thermostat

[teamsmiffy]

Re: Belling IDW604 thermostat switch defective?

Thanks – I seem to be having the symptoms you’ve described with the unit sounding the alarm for 30 seconds, the machine being drained and E3 displayed.

Is the thermistor available separately?

[teamsmiffy]

Re: Belling IDW604 thermostat switch defective?

I’m getting the E3 error, but not every time.

The water is being heated as I’ve recorded 50 deg C using a thermometer mid cycle.

I’ve just installed a new thermal sensor, and the first run worked all the way though. The second run ended early with the E3 message 🙁

I’m not sure what to try next – any thoughts?

[Author]

Posts