[TELL]

Re: been to H/point CTD00G con’d drier. Not Drying Clothes?.

YUP, your right, forgot
will check.
TELL..

[TELL]

Re: Ariston B/I fridge Need Door assy Pt.No.

thanks jim,
will do a bit research, will try ariston, to see if they come up with same numbers?.
TELL..

[TELL]

Re: Ariston B/I fridge Need Door assy Pt.No.

jim,
Thanks for the e’mail, but it looks like its coming up with all the part no’s i have on my list as the same. but i’m trying to find the one that has a complete door assy, this one is definately a complete factory moulded door assy. partfinder is showing all of these as seperates, door, liner and gasket, i think this could have changed on the A2071/1 model?. unless anybody knows different?.
TELL..
p.s with the cost of the door, i dont want to make a mistake.

[TELL]

Re: Moffat 4235 Hob

oop’s put a digit in the wrong place there, should be 31ER1 sorry

[TELL]

Re: Moffat 4235 Hob

fitted many of these in my younger days. try the Dimond H 131er1, single energy reg with pilot.
TELL..

[TELL]

Re: HELP, a customer has done it again, i need a wiring diag

i think that should help me. it looks like he has put the black and white wire onto the live, aswell as not linking it with the N from either the stat, or heater onto its own terminal.P.S. I’m trying to copy my photo on to this page, but now your asking something now!!!!.
TELL..

[TELL]

Re: whirlpool ADG957 wash pump motor, 2 listed. Which one??

that sounds like the one i’m after, its the little spout on the housing. thanks for your help Gents.
TELL..

[TELL]

Re: whirlpool ADG957 wash pump motor, 2 listed. Which one??

their is no letter’s after this model No. and the pt no. 481236158124 you have given me = 481225928654 on the connect site, the one that ends in 214 is not reconised. on connect,masterparts, and quatex sites?.
TELL..

[TELL]

Re: shopping list for models uknown and parts

thanks andy got all that.
TELL..

[TELL]

Re: door hinges for wht/westinghouse oven

thanks andy
will sort out with customer to morrow
TELL..

[TELL]

Re: hotpoint d/washer keeps shutting down with fault code 3+

thanks graeme,
i wonder if anybody has any readings/ resistance’s on the various components, so i can compare?.
TELL..

[TELL]

Re: hotpoint d/washer keeps shutting down with fault code 3+

graeme,
have checked the heater, its ok. what i cant understand why it has worked on three washes, then shut down?, and why did it start up, washed, then drained ok on test cycle?.
TELL..

[TELL]

Re: hotpoint d/washer keeps shutting down with fault code 3+

checked the switch its making a circuit ok, and checked to see if it is operating, thats ok. but the motor did go on 1st time and it washed when i put the pcb in, on its initialising the programme. now it just fills to level then drains, with the 3+5 fault code. wont do anything else.
TELL..

[TELL]

Re: whose is this cooker, SERENA mod SK 300X. need parts for

thanks gents. will give m/pts a shout to-morrow.
TELL..

[TELL]

Re: bosch dishwasher mod SHV43A03GB/38 water distributor.

thanks Greg.will tell customer the good news.
TELL..

[Author]

Posts