[TELL]

Re: Electrolux hob EHE682B

all 4 plates are different, these are the orig pt/no,s see if this helps.
357 01 08-03 / 9 Electric plate,P 145-1000W/230V
357 01 08-04 / 7 Electric plate,P 180-1500/230
357 01 08-05 / 4 Electric plate,R 145-1500/230
357 01 08-06 / 2 Electric plate,R 180-2000W/230V
you might be able to match them.
TELL..

[TELL]

Re: schreiber halogen hob SCH1711 which tubes is it.

thanks nwar.
masterparts have done a search on these parts for me, and i’ve been told the 550w, and only has 1 x 700w spares are obselete now, also need a selector switch aswell, and its obselete. dont think i’ll gown that road for chasing spares.
much appreciated for touy troubles.
TELL..

[TELL]

Re: schreiber halogen hob SCH1711 which tubes is it.

thanks for that NWAR,
i can see what i need now. looks like i need r/h halogen tubes for the front and rear elements. 2 x hl550 obviously 550w
and 2 x hl700 … 700w

can you see if they are available, and price them for me. will there be a trade price? and a retail price.
TELL..

[TELL]

Re: need pt no. for a d/washer element. (bernstein)

thanks andy.
TELL..

[TELL]

Re: need pt no. for a d/washer element. (bernstein)

hi, andy
checked that part no. that looks like the one, but as for the bernstein model no. as your example given, it doesn’t have one. everything i copied down off the plate is on the 1st page.
TELL..

[TELL]

Re: zanussi zwf1632w

i can’t see that model listed, have you got the PNC no.? then i can check for you.
TELL..

[TELL]

Re: need pt no. for a d/washer element. (bernstein)

thats not it, checked the element pt no, on connect, and the element that need has only 1, 90 deg bend. L shape.
TELL..

[TELL]

Re: Stoves Range

usualy hard to get numbers for the stoves range stuff, due to the model numbers, but have you tried kichen economy, they are canny, for ID part no’s.
TELL..

[TELL]

Re: Moffat MD900B Main oven stat PNC 944171050

old moffat oven, try part no. 3110224007, m/o stat.
TELL..

[TELL]

Re: OLD Zan intergrated d/w spring cable

old boy eng on the zanussi range, i think you might have to kick this into touch, this model was on microfichce only, and its not listed on the TDS site. i think these were of a metal wire, wound type, and a loop formed on both ends by the cable being pushed back on itself through a metal coller, then crimped. the only the other way is if you have a sea fishing friend?, he could possibly make up a couple of heavy duty traces, with loops formed at the ends. he will know what to do. depends on how desperate you want to repair the d/w. hope that suggestion helps.
TELL..

[TELL]

Re: zanussi

Table of alarm codes
Alarm Possible fault Action/machine status Reset
E11
Tap closed or water pressure too low; Drain tube improperly positioned; Water fill solenoid
valve is faulty; Leaks from water circuit on pressure switch; Pressure switch faulty; Wiring
faulty; PCB faulty.
Cycle is paused with door locked. START/RESET
E12
Tap closed or water pressure too low; Drain tube improperly positioned; Water fill solenoid
valve is faulty; Leaks from water circuit on pressure switch; Pressure switch faulty; Wiring
faulty; PCB faulty.
Cycle is paused with door locked. START/RESET
E13
Drain tube improperly positioned; Water pressure too low;
Water fill solenoid valve is faulty; Water circuit on pressure switch is leaking/clogged; Pressure
switch faulty.
Cycle is paused with door locked. START/RESET8 ALARMS
8.1 Displaying the alarms to the user
The alarms are displayed by the red LED of the START/PAUSE button flashing and simultaneously through the
LCD or Display.
The alarms displayed to the user are listed below:
�� E10 – Water fill difficulty (closed tap)
�� E20 – Drain difficulty (dirty filter)
�� E40 – Door open
only thing i can find. hope this helps.
TELL.

[TELL]

Re: been to H/point CTD00G con’d drier. Not Drying Clothes?.

had pump off and checked through to condenser housing, all clear. also checked to make sure pump works, filled rear resevoir, pumps away ok.
its a good one!!.
TELL..

[TELL]

Re: been to H/point CTD00G con’d drier. Not Drying Clothes?.

thats ok, and not overloaded. the drum temp inside is very poor, especialy with the clothes in,(half the load i would normaly put in. i found the element cycles on/off quite quikly, thinking it must be air flow, but there is no blockages in the ducts, and the heater blower fan goes like the clappers, aswell as the condenser fan at the front.
TELL..

[TELL]

Re: been to H/point CTD00G con’d drier. Not Drying Clothes?.

well i’m back. checked the front stat, its ok. shorted out wires to test. still the same. got one of these plug in adapters to test wattage of elements, both coming in when selected. 1/2 heat gives a reading of approx 1.4kw, full heat 2.6kw. stripped out ducting no blockages, good air flow. and the thing is still not drying the clothes, timer set in excess of 100mins. ps. the water pump is working ok aswell. changed rear stats, white spot new type.
any ideas. i’m beat.
TELL..

[TELL]

Re: Zanussi FJ1296 Timer knob programme indicator

the part your after comes with the contol panel, pt/n 1247581901. if no good around dealers, try distri parts direct.
TELL..

[Author]

Posts