[The_Hobbit]

Re: Kelvinator / Fisher & Paykel – Smart Drive 051

Thanks Penguin & Kiwi,

Sorry for the delay getting back to the group with my progress on this – I became a Dad a few days after Kiwis reply so that’s been taking up a fair bit of time.
Anyway, Penguin was pretty much on the mark, the water level wasn’t changing, but I believe it was because it wasn’t -filling- fast enough, swapping the hoses from cold to hot and switching to a hot wash (or using an alternate water source) avoided the beeps.
I checked the pump as per Kiwis instructoins and that was running freely so, armed with that knowledge I was able to enlist the help of the local repair guy who has replaced the cold valve on the machine and we’re up and running, all ready for that tower of washing which will begin when wife and junior return from hospital.

Thanks to the group – this has been a great resource and a good find which will stay in my bookmarks.

Cheers! 😀

[The_Hobbit]

Re: Kelvinator / Fisher & Paykel – Smart Drive 051

Hi there Kiwi,

Thanks for the quick reply. The LEDs read as follows:

0 0 1 0 0 1 0 1

Where 0 = Off and 1 = On 🙄

I’m hoping it’s an easy fix…

[Author]

Posts