[thedishwasher]

Re: Diplomat ADP 8234 will not start?

Resetting didn’t help so I ordered a new soap dispenser unit from you and also sent the PCB away for testing. The PCB came back without any fault found so i confidently put the machine back together with the new dispenser which didn’t look exactly like the original but did fit ok, apart from a couple of screws which i intend to sell on ebay to reduce my costs, and hey presto – it worked!!!

Now I’m in the mood I might track down that squeak from the washing machine!

many thanks for all your help penguin45

thedishwasher

[thedishwasher]

Re: Diplomat ADP 8234 will not start?

Thanks penguin45

I rechecked the door switch – unfortunately it works fine!

I then got carried away and decided to test everything apart from the PCB and found that the soap release solenoid wasn’t functioning.
Is it likely that the solenoid blowing could damage the PCB?
Replacing both the PCB and the soap dispenser will get pricey even without an engineer. Can PCB’s be repaired successfully?

Incedentally, I couln’t find any reset procedure info in search.

thedishwasher

[Author]

Posts