[thewelder]

don wrote:I think someone is taking the proverbial 🙂

Have you tried my suggestion?

Don

Thanks Don, i’ll give that a try, I’ve never seen that on a cooker before, just seemed a bit odd at first.

[thewelder]

Just had this reply from Hotpoint after I sent a video highlighting the problem, its laughable:

Thankyou for your video showing exactly how the ovens operate, compared to older versions when the fan was tied to the door. Top tip my partner wears glasses so will turn the thermostat dial for the oven down before opening the door to stop her glasses fogging.

If there is any further assistance needed please contact us on 03448 22 44 66, Monday to Friday 08:00-18:00, Saturday 08:30- 16:30, Sunday 09:30-15:30

Kind regards
Matthew

[thewelder]

No odd noises at all, works great when i can get it working, maybe the wife is overloading it at times i think that could be an issue, might wait for a nice day and strip it down see if anything is blocked

Chris

[thewelder]

electrofix wrote:if your having to push the reset button all the time then you probably got an air flow problem. if there is not enough air flow running over the element it over heats and trips the stat

Dave

Thanks for the reply, is there an easy way to resolve that problem?

Chris

[thewelder]

Thanks again for all the help, door is now mended i have even reversed the door after watching a you tube video , the spring on the door catch was a pain in the arse but all is good.

Chris

[thewelder]

Thanks for the replies, the lug on the door was broken as suggested, so i will order a new one.

[thewelder]

Re: Bush Dishwasher Error

Having left the dishwasher on the stuck glass program it started up and was producing hot water then dried , so does that indicate it’s not a heater problem?

Chris

[thewelder]

Re: Bush Dishwasher Error

Thanks for the reply, I will check the heater element first see how that is.

Chris

[Author]

Posts