Re: Zanussi ZT 695 dishwasher
Hi Penguin45
Sorry for the late reply.
After checking the IWMS I can confirm that the unit was pretty much spotless so don’t believe the fault is due to this unit being blocked.
However, after I carefully turned on the machine and selected a programme I could hear the hummimg as normal but still no water was entering the unit. I gave the inlet valve a firm tap and immediately the valve allowed water in. I guess the fault was just due to a sticky valve so this might be a common occurence with this machine.
Note – to access the IMWS you need to remove the left hand side panel of the machine and not enter under the machine as described in your text.
Thanks