[Timpar96]

Re: Hotpoint WD 62 washer dryer fills with water on dry cyc

Hi all, It turned out to be the pump as you said which was semi blocked.
When on a dry cycle it could not pump as quickly as the cold water input for the condensing.
Cleaned out pump and now all OK.
Thanks for every-ones input.

[Timpar96]

Re: Hotpoint WD 62 washer dryer fills with water on dry cyc

Thanks.
I will see if the pump runs at all during the dry cycle and if so if it stops at all.
As I said previously there is water in the drum after less than ten minutes operation.

[Timpar96]

Re: Hotpoint WD 62 washer dryer fills with water on dry cyc

iadom,
If the pump is not running on the dry cycle but runs OK on a wash cycle what else should I look at?
Thanks for the help all.

[Timpar96]

Re: Hotpoint WD 62 washer dryer fills with water on dry cyc

Thanks Andy,
I will investigate if the pump is running.
If not running does this indicate problems with the programmer/timer?

[Timpar96]

Re: Hotpoint WD 62 washer dryer fills with water on dry cyc

Thanks for that.
I will check if the pump is running when I go to see the machine again on Saturday.
I will let you know what I find.
I guess the water is entering OK. Water can be seen in the drum about ten mins after the drying cycle starts.
If the pump is not running does this indicate problems with the programmer/timer?
Thanks for your prompt response. Much appreciated.

[Timpar96]

Re: Hotpoint WD 62 washer dryer fills with water on dry cyc

Thanks Martin.
Is the pump supposed to run on the dry cycle?
It runs OK on the wash cycle an spins empties OK before the dry cycle.

[Author]

Posts