TingTong

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • November 7, 2006 at 7:17 pm in reply to: Diplomat 8322 Cutout #193211
    TingTong
    Participant

    Re: Diplomat 8322 Cutout

    Thanks DP. 🙂

    November 6, 2006 at 6:23 pm in reply to: Diplomat 8322 Cutout #193209
    TingTong
    Participant

    Re: Diplomat 8322 Cutout

    Does this mean if I replace the Askoll pump with a replacement, it will cure both the leak and the problem??
    If so, how difficult is it to replace?
    Thanks. :rolls:

    November 1, 2006 at 11:13 am in reply to: Diplomat 8322 Cutout #193207
    TingTong
    Participant

    Re: Diplomat 8322 Cutout

    Thanks DP, I’ll check it out tonight.
    Does this assume that the PCB is OK?

    October 31, 2006 at 7:15 pm in reply to: Diplomat 8322 Cutout #193205
    TingTong
    Participant

    Re: Diplomat 8322 Cutout

    😥 Ordered Control PCB from local store (Top of the Town, East Grinstead) part No. 4812 218 38381.
    Put it in and started a 65deg wash.
    Stopped after 13mins with 3 beeps. 65deg led only on. Hot and steamy inside with slight leak on floor.
    Closed door and started running with worse leak on floor.
    At 20 mins relay again struggling intermittently about every sec.
    Stops at 23 mins with intermittent beep. Sray and ON leds on.
    Whats occuring??

    October 25, 2006 at 8:18 pm in reply to: Diplomat 8322 Cutout #193204
    TingTong
    Participant

    Re: Diplomat 8322 Cutout

    Thanks guys. You confirmed what I thought. No leak, needs CPU 😥

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)