Forum Replies Created
-
Posts
-
Re: Hotpoint WM. Conditioner not taken
By the way , to be accurate, the machine has a hot and cold water inlet , both supplied with cold water through a splitter.
Re: Hotpoint WM. Conditioner not taken
Ok . I know how it should work .
Now , I am not sure that during the conditioner phase actually both valves are powered on by the main module (I didnt have time to check this) . All I know is that on wash phase correspondent valve works , and on prewash the other one either.If on the conditioner phase only the wash valve is powered on , means the main module is faulty …. Theoretically is possible.
And , if the low water pressure is the cause , how can you explain that on the conditioner phase water was spraying ONLY on the prewash compartment and not at all on the wash and conditioner’s …
