Tjb1976

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Hotpoint RD966J washer dryer fault #492193
    Tjb1976
    Participant

    That’s interesting because I bought it with a failed dryer heater. It would go down to earth as it warmed up. I’ve fitted a new one and that works fine. I’ll check the washer element to see how that behaves. Thank you for your reply

    in reply to: Hotpoint Fdl 9640 #479929
    Tjb1976
    Participant

    I had previously tested 42 ohms across the element and at the pcb plug
    tried to earth with the multi meter nothing.
    blew the dust off my old megga to find the element is down to earth.
    tried a cheeky test removed the earth wire to the heater. Selected a drain and spin cycle which it merrily started to run.
    Thank you for your Help
    Your a star
    Regards
    Tim

    in reply to: Hotpoint Fdl 9640 #479927
    Tjb1976
    Participant

    Thanks for sticking with me
    from the bottom working up I have the first 4 on and the top 2 off
    OFF
    OFF
    On
    On
    On
    On

    in reply to: Hotpoint Fdl 9640 #479925
    Tjb1976
    Participant

    Wash is off. Rinse is off. Spin is on. Dry is on. End is on . Lock is on.
    hope that makes sense tried to upload a pic but it won’t for some reason

    in reply to: Hotpoint Fdl 9640 #479923
    Tjb1976
    Participant

    Could you elaborate a bit please
    super wash slow spin time save eco wash and play all flash rapid

Viewing 5 posts - 1 through 5 (of 5 total)