[Tomboy]

Re: Zanussi FLS 1183W

OK. Thanks for the info, aqualetric. Turning it upside down was not intentional. 😆 We carried it up three storeys of fire escape and nearly dropped it on a tight turn. That’s when it ended up the wrong way up and some sludge came out of it.

[Tomboy]

Re: Zanussi FLS 1183W

Very unlikely to be the pressure switch at fault. Either:-

Thank you Aqualectric 😀

1) There is a small hole rubbed in the pressure hoses;
😳 Sorry but could you tell a newbie where to find these.

2) The pressure chamber on top of the filter housing is full of sludge. This is a fiddly job; but not too difficult. The pump / filter housing has to be removed from the machine to do this properly.
This seems most likely as it was working fine untill we turned it upside down whilst moving it. 😆
I can recognise the drain pump. If I take it off, and clean it out, will the pressure chamber be obvious? Do I need to remove it as well to clean it ?
TIA

[Tomboy]

Re: Zanussi Aquacycle 1050 flooding. Help please!

Penguin45 wrote:Model number, please.

Penguin45.

FLS 1183 W

[Author]

Posts