[tsayers66]

Re: Lamona 3301 Selector Switch

Thanks it worked, I will order the replacement now.

Thanks for your help and patience!

[tsayers66]

Re: Lamona 3301 Selector Switch

Picture 1 is the back of the selector switch
Picture 2 is the outside of the front panel, showing a circle to the rear of where it is welded? together.
Picture 2 shows the front panel removed, I can see the screw heads through the hole in the front, but can’t get to them to take them out.
Cheers

[tsayers66]

Re: Lamona 3301 Selector Switch

Hi,

Yes its the selector switch I need to remove.
More pictures attached, when I remove the front panel by taking out the side screws, the front panel is still in one piece with no access to the selector switch screw heads.

[tsayers66]

Re: Lamona 3301 Selector Switch

Hi,

Thanks for the quick reply, its the front plate that I cannot split, I cannot access the screw heads for the selector switch, it seems to be stuck together, I have attached a picture, there are 6 of these holding it together, hope this helps.

Cheers,
Thomas

[Author]

Posts