[typhoons]

Re: Proline PDW080 Timer stopping in mid program

Hi,
I’ve removed the element and found ot burnt out on the corner.
Thanks for your help

Dave

[typhoons]

Re: Proline PDW080 Timer stopping in mid program

Hi,
thanks for the reply, I found 2 conponents that screw into the undeside of the machine, marked KSD 201. Both tested ok for continuity. what I did notice is some burning around the element, but it was not open circuit ( 90-100 ohms).
Is there a temp sensor that I can test, as I think the element is working ‘of sorts’!

Thanks
Dave

[typhoons]

Re: Proline PDW080 Timer stopping in mid program

Hi,
thanks for the reply, but the timer is brand new! It seems strange that the new timer is stopping at exactly the same position as the old one ( I marked the position on the outer dial). Would there be anything that would cut off the supply to the timers drive at this position?

Thanks

[Author]

Posts