[tyremac]

Re: Replacing oven selector switch uk80mfx smeg cooker

Swapped the suspect part and its working fine, I replaced a connector as it was a bit black. Problem solved, thanks forum, not!

[tyremac]

Re: Replacing oven selector switch uk80mfx smeg cooker

I removed the top panel and can see the switch, .however there’s a bar in the way, it possibly is contamination giving poor connection on the. Switch I will clean the existing switch contacts to see if this cures the problem.

[tyremac]

Re: Hotpoint TCM570G door latch

Helo 75

Thank you

Simple fix!,,,,!!!

Thanks again

[tyremac]

Re: Got my suppressor, wtf does it go

Cheers – thank you penguin45, much appreciated

thats the answer I needed-
not someone anwering with a question?
The suppressor needs replaced based on the type of fault I had reported on the forum previously

[tyremac]

Re: Smeg DWF 66 – New board?

I have a really simiar issue, my DWF 66 has tripped the main RCD twice now , I have got it running using just the rinse program, run this cycle a few times and then eventually I select the ECO(wash) program and it runs for 2 weeks then trips the main RCD again,

Any suggestions to the cause?
I would presume the rinse cycle doesnt use the heater?
😆 😆 😆

How much for the suppressor?
I am in Glasgow and could nip to the shop to pick up ?

[Author]

Posts