Forum Replies Created
-
AuthorPosts
-
United
ParticipantRe: Siemens grill problem
Applied, and sent all relevant paperwork, but never heard any more, did chase up and advised never received anything. It is on my to do list, but I am useless on computers, and need to get my son to scan all the documents for me to send online.
Many thanksUnited
ParticipantRe: candy flashing lights
Thanks for your reply, will check out.
United
ParticipantRe: Hoover VHD842-80
thanks, it did heat the water, but I will double check anyway. Thanks for your help.
United
ParticipantRe: Hoover VHD842-80
Heard the click from switch when draining down, and made no difference when removed pressure hose from switch. Thanks
United
ParticipantRe: Candy CDI 1012
Thanks Mr Penguin I’ll give it a go.
November 18, 2008 at 8:20 pm in reply to: Hoover Nextra HND615 SI – Not starting cycle correctly #266957United
ParticipantRe: Hoover Nextra HND615 SI – Not starting cycle correctly
Got the same fault on a Candy CDI 1012, pulsing motor. Have you managed to get yours fixed, if so what was the cure.
United
ParticipantRe: Beko WMA 1512w
Thanks for reply,but managed to get appliance to reset, is now working ok
United
ParticipantRe: AEG T57560 Tumble Dryer
Thanks for the advice, I will check all ducts etc thoroughly, then ensure the heater is cycling on/off. It’s worth remembering the lost supply to motor, it’s the rare ones that usually catch us out.
United
ParticipantRe: Hotpoint WDM73A,error code E30
iadom wrote:On later machines there is a ‘fast blow’ cartridge fuse in a small black holder in line with one wire to the motor. This can fail if there is a drum restriction or other overload.
Jim.
Thanks Jim,I will check out as soon as possible -
AuthorPosts
