[valentino246]

Re: NEFF B1641 oven dead

In answer to your question

I do not have warranty and it is is the main controller that has failed causing a seam of solder to blow. There is good power everywhere on the machine until the controller where the solder had split away and there is no continuity.

Can you suggest a suitable way forward or is the only alternative now to replace the main controller.

All help appreciated

[valentino246]

Re: NEFF B1641 oven dead

Thanks for the advice. I have checked the connectors and all good no burn marks and power going to the connectors fine. I think I must me the controller unless there is something else you can recomend.

All help appreciated as Neff havbe quoted me £230 parts plus £85 call out to repair it. I can get a new oven for that.

[valentino246]

Re: NEFF B1641 oven dead

Thanks very much for that, I will double check the connectors at the rear of the oven.

I did notice some dark burn marks on the main control unit nearest the point where the selector comes out. This is what made me think that that might have blown.

All help appreciated.

Thanks

[Author]

Posts