W31rdy

Forum Replies Created

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • April 28, 2014 at 6:23 pm in reply to: Bosch Classixx6 1400 error F21 #412884
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    Ok, so let me get this straight, you have helped me this far and just because I fail to understand an acronym and the current solutions presented have not worked you going to just stop helping?

    Basic knowledge is subjective, whats your definition of basic?

    I have two kids, an increasing pile of Laundry and have spent £20 on your advice I can hardly afford to try and fix this!

    Please dont play games with me, I need to resolve this! You where being extreamly helpful 🙂 Why stop now?

    April 28, 2014 at 6:06 pm in reply to: Bosch Classixx6 1400 error F21 #412882
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    TOC? O/C Open Circuit?

    Best way of checking the windings is to remove the motor I guess?

    April 28, 2014 at 5:49 pm in reply to: Bosch Classixx6 1400 error F21 #412880
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    Ok, disconnected the multi block from motor, did reset as you said, plugged back in, redid reset as you said! Still nothing 🙁

    April 28, 2014 at 5:34 pm in reply to: Bosch Classixx6 1400 error F21 #412879
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    Martin wrote:No!

    Disconnect the motor plug then do the reset procedure again. Then plug the motor back in. Try it then.

    will do thanks 🙂

    April 28, 2014 at 5:08 pm in reply to: Bosch Classixx6 1400 error F21 #412877
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    Martin wrote:

    W31rdy wrote:
    WAE28363GB

    Not the full number but hey. 🙁

    Press and hold the spin button whilst turning the dial to the 6o’clock position. Then turn one position clockwise and release the spin button. Reset the dial to off.

    ok, WAE28363GB/02 FD8711603100

    Still does nothing but flash F21 at me 🙁

    So could be brushes be in wrong? I have the bevel pointing down towards the middle, could they no be seated properly?

    April 28, 2014 at 4:22 pm in reply to: Bosch Classixx6 1400 error F21 #412875
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    WAE28363GB

    its the 1400 Model about 5/6 years old if that helps 🙂

    April 28, 2014 at 4:21 pm in reply to: Bosch Classixx6 1400 error F21 #412874
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    I was thinking could the brushes be upseide down or not fully seated? Will get the ful number for you now 🙂 THANKS in Advance for your help!

    April 28, 2014 at 1:38 pm in reply to: Bosch Classixx6 1400 error F21 #412872
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    Brushes changed! Still get the error!

    Have I just wasted £20? and an hours work?

    April 25, 2014 at 3:43 pm in reply to: Bosch Classixx6 1400 error F21 #412871
    W31rdy
    Participant

    Re: Bosch Classixx6 1400 error F21

    Martin wrote:The motor brushes need replacing to sort. Simple fix, go for it!

    and cheap too 🙂 THANKS good place to start 😉

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)