[wakeypat]

Re: Bosch Logixx 1400 Washing Machine not collecting softene

Thanks Goatboy and Simon, you were right (of course), I used a narrow plastic tie wrap, followed by a jet of compressed air (from a can) to clear the Yukkie snot from the water feed holes and Whallaha, everthing is back to normal.

Thanks again

Pat

[wakeypat]

Re: Bosch Logixx 1400 Washing Machine not collecting softene

My fault, I wasn’t specific enough. I can remove the dispenser drawer OK. What I’m actaully considering is removing the control panel to allow access to remove the internal white moulding with the water feed holes in it. Then give it a thorough check and clean with it off the machine.

Thanks Pat

[wakeypat]

Re: Bosch Logixx 1400 Washing Machine not collecting softene

Thanks for the reply, I’ve already done that (it was a bit horrible in there, black guey stuff rather than limescale (we are not in a limescale area), however it doesn’t appear to have cured it. Wondering if I need to remove the whole dispenser box and give it a more thorough clean?

Thanks Pat

[Author]

Posts