Watson306

Forum Replies Created

Viewing 4 posts - 31 through 34 (of 34 total)
  • Author
    Posts
  • Watson306
    Participant

    Re: 8 year old Bosch Classixx (SGS43C12GB/08) Dishwasher Pro

    So to summarise – if I turn the machine on, and make it start from the beginning it will fill, and will cycle the water around, but then when it gets to the end of the first cycle it empties, and will continue to try and drain even tho there is no water left in the machine.

    I have checked on the base plate and there is no water, and there does not appear that there ever has been.

    Watson306
    Participant

    Re: 8 year old Bosch Classixx (SGS43C12GB/08) Dishwasher Pro

    Any Ideas guys???

    Watson306
    Participant

    Re: 8 year old Bosch Classixx Dishwasher Problem

    Just pulled the dishwasher out under a light and can now see the model number stamp which is very faint but appears to be SGS43C12GB/08

    Hope this helps

    Watson306
    Participant

    Re: 8 year old Bosch Classixx Dishwasher Problem

    Whilst I was waiting I just took right hand side off as well and then disconnected the red wire off of one side of the heater unit, and measured 23ohms across it – so can I assume then that is ok?

    I have just had another thought, which takes me back to my original thoughts of there being a blockage somewhere – just after Christmas I was cleaning the filter out, and I noticed that a piece of glass (not sure where it had come from) was sat in the bottom of the filter – could there be more glass stuck somewhere? As said previously I have checked the pump, and made sure the propellers move freely.

Viewing 4 posts - 31 through 34 (of 34 total)