[WazzaAndWenches]

Re: Fisher & Paykel error codes

Problem with a GW701-u washer.
Works till random place in the wash cycle then stops with continuous beeping. Lights up as follows… off off off on off off off off.
Need to power off then on and Advance to restart. Regularly faults again during the remaining cycle. Eventually need to advance to Final Spin to complete the wash.

Have pulled out the pump and checked it’s clean.

Tried Diag mode. Don’t get the two beeps but still appears to be in Diag.
Fault sequence is on off off off off off on off. Also has Spin Slow/Hold and Water Level High/Low lit up.

Help very much appreciated as local service agent has proven to be far less than competent on other appliance and next closest agent is 90km away 🙁

[Author]

Posts