Weightec1

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 24, 2016 at 11:47 am in reply to: Bosch SGS problems #443028
    Weightec1
    Participant

    Re: Bosch SGS problems

    Had the cap tested and it came out at 4.02uf which I guess means it’s fine any other ideas folks? Motor or main pcb???

    November 21, 2016 at 11:24 pm in reply to: Bosch SGS problems #443027
    Weightec1
    Participant

    Re: Bosch SGS problems

    Just got round to testing No earth leakage to ground found just 22.2ohms across the elements terminals.
    Would a faulty recycle motor starter capacitor have anything to do with it? I found a shard of glass in the prop housing when I separated it from the heater section, could that intermittanly jamming damage the motor (which has been powering the rotors before and after the glass was removed) or the starter cap straining to start a jammed motor ?

    November 21, 2016 at 3:58 pm in reply to: Bosch SGS problems #443025
    Weightec1
    Participant

    Re: Bosch SGS problems

    Tried that and removed the reed switch it operates and checked the magnet operated it ok with a multimeter and it did. Any more ideas folks?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)