werdas

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • in reply to: Zanussi ZDC67550W tumble dryer heat #248036
    werdas
    Participant

    Re: Zanussi ZDC67550W tumble dryer heat

    the height of the room is normal-230cm, there is no ventilation at all, no windows in that room, doors always closed. I do understand that all this effects the heat in that room, but is it still normal for a tumble dryer to make the condensed water very hot? and the dryer itself gets very hot

    in reply to: Choosing the air conditioner for a 15m2 room #248014
    werdas
    Participant

    Re: Choosing the air conditioner for a 15m2 room

    THANK YOU

    in reply to: Changing Door Swing on Zanussi ZDE57140W Dryer? #246411
    werdas
    Participant

    Re: Changing Door Swing on Zanussi ZDE57140W Dryer?

    Washman wrote:Hi

    You do not remove front panel , if you have the same model as above just follow instructions. If you have a different model it may be that the door is not revesible .

    Make / model and serial number please for further advice.

    my model is zdc67550w,
    it says it is reversible, + it looks like, just when I started to do the job I notices if I would unscrew completely door catch it would stay/fall in under front panel. SO I had to stop, and seek for a advise

    in reply to: Changing Door Swing on Zanussi ZDE57140W Dryer? #246410
    werdas
    Participant

    Re: Changing Door Swing on Zanussi ZDE57140W Dryer?

    my model is zdc67550w,
    it says it is reversible, + it looks like, just when I started to do the job I notices if I would unscrew completely door catch it would stay/fall in under front panel. SO I had to stop, and seek for a advise

    in reply to: Changing Door Swing on Zanussi ZDE57140W Dryer? #246408
    werdas
    Participant

    Re: Changing Door Swing on Zanussi ZDE57140W Dryer?

    markie wrote:Hi Washman,

    Thanks for your reply. Have just done as you said and the door is now changed to the other side (wife is happy !).

    Hurray !

    Hi how did you remove the front panel?I do not see any screws..

Viewing 5 posts - 1 through 5 (of 5 total)