woosing

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: new Miele G1232SCSS, hot or cold fill? #243724
    woosing
    Participant

    Re: new Miele G1232SCSS, hot or cold fill?

    Hi

    We used our miele on cold for 3 years, hot for 7, then back to cold in different houses and have noticed no difference in wash standards except of course the energy bills! According to the documentation Miele seem to have built program and technology in to handle either but I may be wrong

    I should point out that (as per other post) I did ensure that the hot water was not too hot and we had good hot pressure as per the manual. I would do it again if the fuel economics made sense. The best thing was the hot prewash! Cold prewash always seems to turn stinky very soon afterwards if you are not around to set the main wash going. I guess hot inlet is for nerdy types like me 😕

    in reply to: miele dishwasher Help!!!! #262694
    woosing
    Participant

    Re: miele dishwasher Help!!!!

    Hi

    I will compare with my 665 in the next few days when it is back on its side! and let you know if I have any insight…many miele bits do seem a bit complicated at first but I have often found that you just need to think like a german. Things normally only come apart one way, the miele way!

Viewing 2 posts - 1 through 2 (of 2 total)