[xigel]

Re: F&P MW051 (smartdrive)

More… trouble!?

This time the hot water is very slow to fill, its not much more than a dribble. After awhile it starts beeping as it is trying to fill up – presumably to let you know that something is not right. I suspect it could be the hot valve or the electronics’ controlling it. The cold fill’s fine (as far as I can tell).

We have been using hot buckets of water to add water manually.

I tried the diagnostic thing again (being short of any other ideas) and it was the same as last time. 00001001. But other than the slow fill its working just right.

Any ideas again? Thanks for your help.

Cheers,

Dan,

[xigel]

Re: F&P MW051 (smartdrive)

Legend!! Thanks for that. The memory clear thing did the trick.

Mrs Dan is very happy to have it working again, and wonders whether she should send baking.

Thanks heaps for your help.

[xigel]

Re: F&P MW051 (smartdrive)

After having a look through the forums I found this, so I thought I would give it a go. http://www.ukwhitegoods.co.uk/modules.p … ic&t=14845

No real joy, except after some button pressing it started to fill with hot water. Interestingly enough while it was doing that and (the subsequent draining of water) I could lift the lid up without it stopping the hot water filling etc.

Does this lend more weight to the lid switch theory? Currently when you power on, and press start it beeps angrily and displays the red spin led only.

[xigel]

Re: F&P MW051 (smartdrive)

Thanks, there was no beep’s while holding down ‘wash temp down” and “power” but it seemed to do the rest… the code, as you look at the lights – (so right most 1 is the red spin light) was: 00001001.

I’m not sure if that is the right way round – sorry.

Cheers

Dan
dan.m81@gmail.com

[Author]

Posts