zaphod

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • in reply to: New motor brushes Vax 2100 #161206
    zaphod
    Participant

    Re: New motor brushes Vax 2100

    Can I recommend googles and gloves for the big hammer part of the attack?


    No no, we are far more sophisticated than that. 🙄

    The brush will come out………but whether or not another will replace it is another thing.
    If not there is lots of useable salvage. All sorts of crap that may be useful one day…………….or not

    One more very small (caravan) carpet to clean first tho’.

    Shall I report my inevitable success, or keep quiet about it? 😀

    in reply to: New motor brushes Vax 2100 #161204
    zaphod
    Participant

    Re: New motor brushes Vax 2100

    Thxs GB, but I will have a major psycho-wallet problem with any repair cost.
    I only paid £6 for the thing! 😀

    I will go into ‘nothing-to-lose’ final attack mode shortly ………….. there has to be a way ……………. the quest continues…………….

    in reply to: New motor brushes Vax 2100 #161202
    zaphod
    Participant

    Re: New motor brushes Vax 2100

    Hi Goatboy & thxs.

    Yes the motor would not always start, so stripped down to it, gave brushes a prod & it was fine. Then it starts to slow & you can see the front brush sparking — give a tap (no, not with a metal end!) & all is fine again.

    Guess I will have to find a scrap motor someplace as I refuse to be a captive market victim wherever possible 👿 🙄

Viewing 3 posts - 1 through 3 (of 3 total)