[zen]

Re: help with indesit WD12x fault & error code

well looks like the sensor solved the problem but i am getting a little water leaking out from around the new sensor. is there any special sealant which can be used to cure this??

cheers

Zen

[zen]

Re: help with indesit WD12x fault & error code

thanks for the help so far. gonna order the sensor 2nite to give that a try.

whats an eprom though??

[zen]

Re: servis m9312 washer dryer – dryer not working

dryer working now. i have the instruction manual so i knew about the half load setting for the tumble dryer. i put the washing machine on and let it run. once washer finished tried the tumble dryer and it worked.

thanks for all the help guys

[zen]

Re: Servis m9312 washer dryer – electrical help required

ok got progress. tested the washing machine first. its taking in water but doesnt seem to be spinning fast. i tried the fast spin progrtam and it seems slow.

tried the tumble dryer side and this isnt working at all. any ideas??

[zen]

Re: Servis m9312 washer dryer – electrical help required

does it matter which lug the wires go on too??

[zen]

Re: Servis m9312 washer dryer – electrical help required

normally i would diagram but my head is in the shed at the moment. not like me at all. will have another look now. i will post some photos if im stuck.

thanks for the help so far

so would the two “TH” wires both go to the thermistor and the two “T90” go to the thermostat??

[zen]

Re: Servis m9312 washer dryer – electrical help required

ive got wires with “T90” & “TH” on. i know ive got the heating element wires right. its just the other 4.

[Author]

Posts