[zomi]

Re: Hoover Nextra Hnl 6166 Triac Tr6 Value needed

Thanks I found the value in the end.
got the data sheet and tested the little triacs too.

all the triacs are working fine … 😯

even built myself a little traic tester 😡

[zomi]

Re: Hoover Nextra Hnl 6166 Drum not turn Help

Any one know where I can get values for the triacs
I need a value for the little ones, on this board like the tr7

Thanks

[zomi]

Re: Hoover Nextra Hnl 6166 Drum not turn Help

just tries it again,
When it has filled the drum,
There is a click sound coming from the ecu/control module.
It doesn’t progress any further after this.

Am I correct in thinking the problem is most likley an issue with the pcb … triac etc/..

[zomi]

Re: OPH148 sealed drum ?

Many thanks for the info..

Its a nightmare with the new machines…

Luckly no this wasn’t a replacement machine, it was machine I was offered..

Are there any of the current machines with still have separate drums .. and non of this sealed rubbish.

Curenntly gone back to a hoover hnl 6166.. not the best but at least its more serviceable than the current stuff out there..

The Ise looks more appealing every day 🙂

[zomi]

Re: Hoover DYN8164D

Thanks for the info.

My better half has had them out,
But they found a coin and said its user fault.

Live and learn,

Older machines were so much cooler 🙂

[Author]

Posts