Forum Replies Created
-
Posts
-
Re: Fisher & Paykel GW611 no drive??
Ok thanks guys. I’ll chase it up. thanks for your help and I’ll post the results for you.
Electronics! buggered with them Buggered with out them!!!
where are you fixing gurus?????? the smartdrive may get a real test when its flying off the balcony. F & P will have to call it auto pilot if it does pull out of its dive!!
No No! it still isnt working. Today i had tried it from powering up the machine from the wall. It had started the cycle, put a few items in the machine then!!!!!!! the water continues to flow but the motor stops, the water fills to the level requested but the next step isnt taken. No motor!! Progress light are on but no progress……..
Re: Fisher & Paykel GW611 no drive??
Checked the motor position sensor and stator condition. All looked fine, no corrosion.
Being a frustrated motor vehicle technician, I have pushed many buttons trying different things from other posts, I now have the 3 rinse/spin lights flashing.
Power off is not clearing them. They are on as so as you switch the power on from the wall.
Any other suggestions? And is the motor control board repairable? I cant see any burn / overheating marks on any component?????
