Forum Replies Created
-
Posts
-
Re: zan TD dead
nice one Andy,
never heard of the part.
TCE7276W
916092667/00
Sn 43400181part number would be great
where is the part situated and how do i get to it?
thanks buddy.
johnRe: zan TD dead
the microswitch behind the bottom right hand side of the plinth that indicates when the condensor flap is open is fine.
i cant seem to see a t/stat on the front of the drum,i cant see one listed on connections either,only a NTC temperature probe,will this be in the same place as the thermostat on the older condensor dryers i.e. near the top of the drum front.
If so how do you get to it to test it?when the lid is removed all you can see is a white plastic housing and the PCB cover.
does the front of the machine come off or do you have to remove the drum from the rear?
even the control panel seems a nightmare to get off, is there an easy way.?
when you swith the machine on all that happens is the “time to go” is dislayed and the start light flashes as if it’s ready to go ,but nothing happens when the start button is pressed,is there a matrix behind the switch that breaks, so the button doesn’t make contact with the switch?
any advise will be great.
thanks
johnRe: zan TD dead
oh very very sorry martin,
just didn’t quite ubder satand what you meant by access panel thats all
jkRe: zanussi dead
hi guys,
really appreciate the diagnostic modes info. ASAP please,
supposed to be going out to machine before 3pm today.
thanks.
johnRe: zanussi dead
they seem nearly new,i only took one off though, i’ll go and check the other one but i would be supprised if it’s that,the machine isn’t that old and only used 3 times a week.
thanks.
johnRe: miele door seal
thanks for that,
the door seals seem to get ripped by things left in the pockets before actually wearing out,so i may try a pattern part,i’ve been told GSK610 will fit OK, and one from maddocks.
thanks.
johnRe: statesman washer
chhers bud,
just been to look at it,pile of rubbish,drum completey u/s after 9 months.
jk
