admin

Forum Replies Created

Viewing 15 posts - 886 through 900 (of 12,518 total)
1 2 3 … 59 60 61 … 833 834 835
  • Author
    Posts
  • January 21, 2015 at 9:37 am in reply to: Baumatic door handle kit for bwd12-1 can’t be £40 can it #423695
    admin
    Keymaster

    Re: Baumatic door handle kit for bwd12-1 can’t be £40 can it

    Hi all

    Its not gias / baumatic putting this price as gias / baumatic is not supplying the part as they have nil stock and it is obsolete . Therefore connect is the one quoting prices.

    Bryan

    January 19, 2015 at 10:35 pm in reply to: uninsulated female spade crimp terminals #423410
    admin
    Keymaster

    Re: uninsulated female spade crimp terminals

    connect ELE7580

    January 19, 2015 at 5:49 pm in reply to: Samsung RSG5UCRS1/XEU – flap problem #423768
    admin
    Keymaster

    Re: Samsung RSG5UCRS1/XEU – flap problem

    There is no motor to close a rsg5 flap.. It closes on its own

    January 19, 2015 at 7:44 am in reply to: New World oven cuts out at 200C #423719
    admin
    Keymaster

    Re: New World oven cuts out at 200C

    Looks like a faulty cooling fan or thermal cut out.

    Bryan

    January 17, 2015 at 6:40 pm in reply to: Baumatic door handle kit for bwd12-1 can’t be £40 can it #423691
    admin
    Keymaster

    Re: Baumatic door handle kit for bwd12-1 can’t be £40 can it

    Hi

    Genuine kit is obsolete. 7020593

    Bryan

    January 17, 2015 at 6:32 pm in reply to: New World oven cuts out at 200C #423717
    admin
    Keymaster

    Re: New World oven cuts out at 200C

    Hi

    Model number would help..

    Gas ? Electric ? fan oven ? conventional oven ?

    Bryan

    January 16, 2015 at 11:37 pm in reply to: Stoves Ovens help please #423576
    admin
    Keymaster

    Re: Stoves Ovens help please

    Hi bern

    The gap is so that there is not a build up of co and also allow air in to allow complete burning of the gas


    Bryan

    January 16, 2015 at 1:18 pm in reply to: Enzo Balestrazzi Return #422140
    admin
    Keymaster

    Re: Enzo Balestrazzi Return

    More info to come in the next week or so… so ive been told.

    January 15, 2015 at 8:27 pm in reply to: samsung rsh1dbmh1/xue fan error and ice build up #423516
    admin
    Keymaster

    Re: samsung rsh1dbmh1/xue fan error and ice build up

    Theres also the pcb to be adjusted for the defrost time

    January 15, 2015 at 8:26 pm in reply to: LG F1222TD #423646
    admin
    Keymaster

    Re: LG F1222TD

    The pcb is pre programmed

    January 15, 2015 at 11:23 am in reply to: LG F1402FDSS #423645
    admin
    Keymaster

    Re: LG F1402FDSS

    AE indicates a leak into the base of the appliance or the anti flood / safety device has been activated


    Bryan

    January 14, 2015 at 7:03 pm in reply to: Stoves Ovens help please #423574
    admin
    Keymaster

    Re: Stoves Ovens help please

    Hi

    All of what you describe seems correct except the oven smelling of gas..or is it..is this the first time you have used it since cleaning it ?.

    If it is gas you smell then you MUST stop using the appliance and turn it off or disconnect it and ensure that it is not leaking gas.

    Bryan

    January 14, 2015 at 7:10 am in reply to: baumatic bwd12.1 #423530
    admin
    Keymaster

    Re: baumatic bwd12.1

    Hi

    BED12.1 doesn’t show E13 as its a fagor appliance but the BWD1212 is a haeir appliance which does have a E13 code. If dryer elements and fan motor and stat all work correctly then replace the PCB

    Bryan

    January 14, 2015 at 6:57 am in reply to: Ikea Renlig DWT160 Underfilling #423373
    admin
    Keymaster

    Re: Ikea Renlig DWT160 Underfilling

    Hi twoten

    Do you have any photos of the dishwasher ? As this is the same fault on a Gorenje range of dishwashers and was resolved by fitting a new pressure switch which allowed approx 1 litre more water into the appliance.

    Bryan

    January 14, 2015 at 6:53 am in reply to: Stoves Ovens help please #423572
    admin
    Keymaster

    Re: Stoves Ovens help please

    Hi

    Unless a engineer attends then how can someone say it’s BER ?. When you light the oven does the flame stay low or does it go high after about a minute ?. Does the flame go right across the burner ?.

    Also the model would help

    Bryan

  • Author
    Posts
Viewing 15 posts - 886 through 900 (of 12,518 total)
1 2 3 … 59 60 61 … 833 834 835