Forum Replies Created
-
Posts
-
Re: neff d/w built in .. s51e50x1gb/24
no water leakage no blockages . doubt it would fill if flow meter faulty (
Re: Zanussi ZKG7125 washer dryer
i have one of these … when turn knob on sometimes works sometimes doesn’t … can sometimes see a tiny bit light .. on lcd but sometimes ,, nothing at all ? am thinking the pcb is faulty ? anyone else had luck … fixing them ?
Re: Beko dw603
o right it could be as i kept trying to reset prog to drain it .. but wouldnt . then after opening shutting and trying a few times pump kicked in .. only just over two years old , thought the days of broken wires down door loom were long over } will need to take it apart suppose (.
Re: Beko dw603
this one is weird tho . went to it was water in base pump running all time .. then reset it .. it started to fill straight away , doesnt pump come on for few times then starts to fill . ? customer called back done same again mmm . couldnt see a leak ..
Re: London Fire
theirs a few whispers that it was the compressor start capacitor that caused it , causing a fire like above. ..not certain tho
Re: London Fire
interesting , i used to do loads of compressor changes even fix punctured evaporators . with the old r12 134a , wouldn’t touch them now ,with r 600a.another dagger to trade grrr , surely a must is to put metal all way round them now , especially at back where compressor is ,
Re: London Fire
not surprised these new fridges freezer full of butane gas all ticking bombs crazy :angry4:
Re: aeg santo fridge freezer not cooling
no you would need a vacuum pump brazing gear refrigerant ect if r 600 a gas which is flammable crimping tools. not economical to repair i wouldn’t think .
Re: beko dsfn 1534w dishwasher
no mate as difficult to get too . never changed many valves on d/w tbh ..was thinking the pcb maby , are the valves iffy on these like ?
Re: aeg santo fridge freezer not cooling
compressor lost its compression / or lack of refrigerant . . bucket job
Re: Repaircare asked me to work for them?
i wouldnt do any work for them ..then there would be more work for us all , and paid properly 😕
Re: Hoover w/machine Door Interlock fault
i have same here dont know weather to try a door interlock .or not . is there any good way of testing the interlocks at customers >without having to fit buy fit one ?actually is there a good way on all w/machines .. which confirms its board?ie with a meter?
