Alanj

Forum Replies Created

Viewing 15 posts - 61 through 75 (of 757 total)
1 2 3 4 5 6 … 49 50 51
  • Author
    Posts
  • October 21, 2016 at 5:46 pm in reply to: BEKO TFF673APW #441968
    Alanj
    Participant

    Re: BEKO TFF673APW

    Freezer was totally defrosted and switched off when I arrived. Took inner back panel off and ran freezer for 15-20 mins, but no frosting or cooling on evaporator. I assume no gas in system. Compressor and fan running ok.

    Alan

    October 4, 2016 at 9:24 pm in reply to: Beko DSC85W #441509
    Alanj
    Participant

    Re: Beko DSC85W

    Thanks Dave, I thought as much. I have fitted the new element today. Just think it’s a shocking waste, as these are prone to going faulty.

    Alan

    September 6, 2016 at 7:48 pm in reply to: Samsung RSA1UTMG s/n Y6584ADF601097B #440474
    Alanj
    Participant

    Re: Samsung RSA1UTMG s/n Y6584ADF601097B

    Thanks guys will check it out.

    September 5, 2016 at 9:51 am in reply to: Samsung RSA1UTMG s/n Y6584ADF601097B #440471
    Alanj
    Participant

    Re: Samsung RSA1UTMG s/n Y6584ADF601097B

    Anybody, any ideas?

    August 26, 2016 at 12:00 pm in reply to: Leisure HJA 6100. s/n 0810217307 #440476
    Alanj
    Participant

    Re: Leisure HJA 6100. s/n 0810217307

    Thanks Bazza.

    August 3, 2016 at 2:23 pm in reply to: Range master dishwasher RDW6012FI S/N 9639001759 #439762
    Alanj
    Participant

    Re: Range master dishwasher RDW6012FI S/N 9639001759

    Hi Lothian, thanks for the reply. Have already sussed that, and new lower spray hub ordered up. Threads on hub split.

    July 29, 2016 at 12:14 pm in reply to: Siemens HB90554GB/01 #439349
    Alanj
    Participant

    Re: Siemens HB90554GB/01

    Have you tested/tried 240v across fan connections to check fan?

    July 27, 2016 at 6:11 pm in reply to: miele W500 #439712
    Alanj
    Participant

    Re: miele W500

    Have you checked the motor brushes? Motor wiring loom?

    July 13, 2016 at 6:02 pm in reply to: Siemens HB90554GB/01 #439343
    Alanj
    Participant

    Re: Siemens HB90554GB/01

    I would say fan motor. Sometimes the shaft of the motor gets clogged with baked in grease, restricting movement. Maybe just windings have gone.

    July 10, 2016 at 5:19 pm in reply to: DeDietrich double oven. #439117
    Alanj
    Participant

    Re: DeDietrich double oven.

    Have you checked for faulty thermal cutout?

    June 9, 2016 at 10:40 pm in reply to: beko dcu 7230 #438394
    Alanj
    Participant

    Re: beko dcu 7230

    Have checked heater trip. It is ok, that’s why I asked about thermistor resistance.

    Alan

    June 9, 2016 at 4:03 pm in reply to: beko dcu 7230 #438391
    Alanj
    Participant

    Re: beko dcu 7230

    I have one of these not heating. I called yesterday and found condenser clogged up, cleaned it up and tried it. Seemed to be heating fine but customer called today to say it wasn’t heating.
    Thermistor on heater reads 4.4kohm? Any idea if that is correct reading? No power coming to heater plug, could this be the board or one of the thermistors?

    Alan
    DCU7230W 7182681500. S/N 15-203276-02

    June 1, 2016 at 5:05 pm in reply to: The Noise #438099
    Alanj
    Participant

    Re: The Noise

    Invoice has been paid now. Was told there was a problem with their client re payment. Bazza, why should anyone wait 2 months for payment for a job? Especially when you only get a call every now and again.

    May 31, 2016 at 9:03 pm in reply to: The Noise #438095
    Alanj
    Participant

    Re: The Noise

    Yes Martin that is them.

    May 30, 2016 at 7:59 pm in reply to: Beko American F/F GNEV221APB #437935
    Alanj
    Participant

    Re: Beko American F/F GNEV221APB

    Thanks Bob, will check it out 🙂

  • Author
    Posts
Viewing 15 posts - 61 through 75 (of 757 total)
1 2 3 4 5 6 … 49 50 51