[Alanj]

Hi Mike, I had no problem getting paid. Sorry I didn’t update post. Just give them a call or e-mail them.

Alan

[Alanj]

Thanks for the reply Dave, Board fitted and oven working again.

Alan

[Alanj]

Hi Dave, thanks for the reply. It’s also one of the models with no code on serial label for setting up board. Does that mean 05 is input to this board at set up?
Board has F03 fault after thunderstorm caused electric spike.

Alan

[Alanj]

Thanks guys.

[Alanj]

Hi Dave, turned out it was airflow. Fan blades were choked with fluff .

[Alanj]

Thanks for the reply Dave. Have got the tech here.

[Alanj]

Hi Dave, airflow is fine, water valve to condenser activates during drying cycle and pump drains water intermittently too.
Have not seen fault described by customer, but don’t think power cuts out, just display goes blank. Machine washes and spins clothes ok on wash cycles. It’s just the drying program that’s the problem.

[Alanj]

Hi Dave in what respect? It is heating and making the clothes hot.

[Alanj]

Thanks Rickard, much appreciated.

Alan

[Alanj]

Hi Grendal, many thanks for your help. Oven up and running again.

Alan

[Alanj]

Hi Grendal, will try that.

thanks Alan

[Alanj]

Re: Panasonic NA-148VA2

Think this fault may have been caused by “out of balance” towel load. Asked customer to do a normal clothes wash. All seems well. 🙂

[Alanj]

Re: AEG Competence BP3003001M 949718143-00

Customer only uses fan oven function.

[Alanj]

Re: AEG Competence BP3003001M 949718143-00

pm sent with e-mail address.

Alan

[Alanj]

Re: Hoover WDXC E 4852-80 N. 31006728 1543 0994

Hi Kai, it certainly was the condenser. It had a build up that actually looked like a paper lining all round inside of condenser.

Thanks
Alan

[Author]

Posts