UK Whitegoods

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 647 total)

1 2 3 … 42 43 44 →

Author

Posts
July 3, 2012 at 11:59 am in reply to: gorenje parts #377386

ANDYVIVO
Participant

Re: gorenje parts

We are national distributors for Gorenje.

June 25, 2012 at 12:20 pm in reply to: gourmets pride cooker #377107

ANDYVIVO
Participant

Re: gourmets pride cooker

Hi
This is Siltal produced, we know that brand, but our parts list online is for a BS100.
Regards Andy

May 15, 2012 at 10:47 am in reply to: SMEG FA550X (Whirlpool) American Fridge Water Problem #374941

ANDYVIVO
Participant

Re: SMEG FA550X (Whirlpool) American Fridge Water Problem

Hoses or wires switched over on the valve? Swapping the wires should solve your problem I would think.
Regards Andy

September 8, 2011 at 4:30 pm in reply to: zanussi iz12 stopping mid cycle #358231

ANDYVIVO
Participant

Re: zanussi iz12 stopping mid cycle

Check the pressure hoses for any wear. Have had this before on my IZ16. Air leaks through either of the hoses causes the cycle to abort.
Regards Andy

July 29, 2011 at 3:29 pm in reply to: gorenje parts #356393

ANDYVIVO
Participant

Re: gorenje parts

Hi John,
If you email Sales@Masterpart.com they will start the account opening for you. We have the parts lists all online.
Regards Andy

July 29, 2011 at 2:45 pm in reply to: gorenje parts #356391

ANDYVIVO
Participant

Re: gorenje parts

We are the main distibutor for Gorenje.
Andy

July 4, 2011 at 4:02 pm in reply to: Teka built in fridge hinges #354646

ANDYVIVO
Participant

Re: Teka built in fridge hinges

Would think this is made be Siltal, so would be 0415549 & 0415550.
Regards Andy

December 13, 2010 at 11:28 pm in reply to: Zanussi D/W hinges #338700

ANDYVIVO
Participant

Re: Zanussi D/W hinges

Hi jim, I am not back into the office until Wednesday, and will have a lot of catching up to do on my return. You could drop an email to sales@Masterpart.com or Graham.Barnett@Masterpart.com to get this looked at sooner for you.
Regards Andy

December 10, 2010 at 3:43 pm in reply to: Electrolux induction hob #337630

ANDYVIVO
Participant

Re: Electrolux induction hob

Could be the glass is dirty on the underside, or they are not pointing there finger at an angle, long nails per chance? Another thought is there a halogen bulb on a hood? Might affect the operation. Failing those then module. Hth, Andy

December 2, 2010 at 11:34 am in reply to: Electrolux induction hob #337625

ANDYVIVO
Participant

Re: Electrolux induction hob

F usually indicates the pan is not detected, well it does on my Zanussi, so I guess this is the same? Is the pan 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} suitable for induction?
Andy

November 30, 2010 at 11:55 pm in reply to: Hotpoint WM63 – No Heat #337503

ANDYVIVO
Participant

Re: Hotpoint WM63 – No Heat

Can’t remember for sure, but might there be an economy / energy save option button? Andy

November 30, 2010 at 10:40 am in reply to: HJA3300 Oven #337398

ANDYVIVO
Participant

Re: HJA3300 Oven

Also i/s @Masterpart.
Regards Andy

November 30, 2010 at 10:37 am in reply to: Hopefully a quick one for somebody, tecnik grill element, #337089

ANDYVIVO
Participant

Re: Hopefully a quick one for somebody, tecnik grill element

Hi Tell
RNGP038435 i/s @Masterpart.
Regards Andy

November 26, 2010 at 1:08 pm in reply to: CDA Intergrated washer dryer #337113

ANDYVIVO
Participant

Re: CDA Intergrated washer dryer

Hi
It is a Smeg and parts are listed on http://www.Masterpart.com
Andy

November 26, 2010 at 10:21 am in reply to: Hopefully a quick one for somebody, tecnik grill element, #337086

ANDYVIVO
Participant

Re: Hopefully a quick one for somebody, tecnik grill element

Hi Tell
It’s a Rangemaster so a serial number would be required to look up.
Andy
Author

Posts

Viewing 15 posts - 1 through 15 (of 647 total)

1 2 3 … 42 43 44 →