Forum Replies Created
-
Posts
-
Re: Bosch WFF1401 motor housing
No, it is a motor only. Motor end frames from Bosch always have a new thermal cut out.
Motor 141344 is in stock at MasterpartRegards Andy
Re: creda brand to be pulled
Not sure about those two but I wouldn’t be suprised.
Hoover is another example of a brand pulled apart.
Australasia, Hoover is Electrolux, America is Maytag, and we have Candy, great innit!Re: creda brand to be pulled
You never know, it may reappear in the UK market as an Antonio Merloni machine to slot in between the Servis and Asko brands.
Re: Creda 37640 tdryer – door trim
Indesit partfinder, and then checked with Indesit spare parts line.
Re: creda brand to be pulled
Colston & Hirundo disapeared many years ago (before I was born?)
I think the last Hirundo was just after the L series Indesit range.
Colston became Ariston, before Ariston merged with Indesit.Ariston will be marketed as the main brand in America (cannot use the Hotpoint brand), and still marketed in Europe.
I forgot to mention that Cannon will remain on the UK market.
Andy
Re: Hoover drum lifters
Generally Hoover / Candy lifters are locate fix with locating screw. You may be able to access the screw through the steam vent hole. If not it may be a drum out scenario.
regards Andy
Re: creda brand to be pulled
To clear things up,
Philco is now Antonio Merloni, I doubt we will see the Philco name again.
Ariston is going to be used as Curry / Comet specials.
Creda is already being merged with the Creda collection by Hotpoint.
Scholtes is another we will not see also over here, but still marketed in France by Indesit.Regards Andy
Re: urgent ! wanted handle kits hpt 9306 etc
At the moment we are waiting for stock to come from Indesit.
They do not have all the parts for the kit in stock, but all being well the kit should be available from next week! (according to Indesit)Regards Andy
Re: Blomberg D/Oven EOD604W
No you are not doing anything wrong! It takes a lot to organise & sift through the data, and then make it suitable for online usage.
If in doubt when you cannot find a model with us, always try phoning 0870 7668365, we will help where we can.
However if we may not be able to help with all Blomberg enquiries, please see my post on the Blomberg BL9A on the trade spares forum.
Regards Andy
Re: Zanussi Jetsystem 1600 – No sounder at end of cycle…
Switch the machine on, press and hold the 8) temperature and spin speed buttons for approx 3 – 5 seconds, release and the buzzer should be disabled or restored.
Re: urgent ! wanted handle kits hpt 9306 etc
It is 0870 7668365, http://www.masterpart.com
Regards Andy
