[ANDYVIVO]

Re: Butler washing machine

some Candy machines, some are Siltal.

Regards Andy

[ANDYVIVO]

Re: part number please

02-3600} Hinge receiver 063025 £1.99 in stock, hinge 063035 £8.49 in stock @ Masterpart.

Regards Andy

[ANDYVIVO]

Re: part number please

Sorry brain lapse, 😳 I will check Tuesday, Andy 😉

[ANDYVIVO]

Re: part number please

Hi, the 3600 is an Elba Delonghi oven, I will check for you on Monday. Regards Andy

[ANDYVIVO]

Re: cda parts

We have some spares & the information on this model @ Masterpart. Regards Andy

[ANDYVIVO]

Re: Baumatic BHWD12H/C Sump Hose

This machine is made by IAR Siltal, stock code SIL36192500, £5.15 out of stock @Masterpart, Again approx September!

Regards Andy

[ANDYVIVO]

Re: Belling XOU500 SS/2 Fan oven motor

Ah, Brandt made, try 74×1146, in stock @ Mssterpart £22.99
Andy

[ANDYVIVO]

Re: DOOR OPENING

There is the Zanussi IZ14, IZ16, IZ141 & IZ161.
Gorenje WA1082, WA1282, WA1582.
Belling (gorenje) BMW1000, BMW1100 & BMW1300.
And some of the older AEG machines.
Unfortunately none of these are new models on the market.
Andy

[ANDYVIVO]

Re: Fairy Active Bursts

Oh yes, almost ALL dishwashers these days will work very well with a hot water supply (8 litres per minute and below 60 degrees C is just perfect )

The main problem with this is when the soiling is protein based, egg is a great culprit and is further cooked when introduced to a hot fill instead of being rinsed off. There is also the shock factor to the load from being cold to very hot quickly. Another is the enzymes in the detergent apparently respond better for being allowed to heat with the solution, rather than immediate hot contact. Apart from energy ratings for, a genuine reason for cold fill only on w/m’s.
But there is the old option of H & C fill, …….distant memories of the Ariston Aristella.

Andy

[ANDYVIVO]

Re: Danfoss electronic stater?

Not at the price I am about to mention, p/n 506005784000 £125 ❗ s/o
Regards Andy

[ANDYVIVO]

Re: Danfoss electronic stater?

Any hints on the Scandinova model number?

Regards Andy

[ANDYVIVO]

Re: WMA spider/bearing kit

Drum support is stock code GDA1604477, and bearing kit is GDA1604600 both in stock @ Masterpart. Official Indesit word on the 30mm set is “fitted to all WMA platforms since october 2003 with spin speeds up to 1200rpm”, although not really relevant if someone has replaced with a 35mm tub!
Andy

[ANDYVIVO]

Re: Diplomat D/Oven APL4406

Basically MFI use the prefix to ID the manufacturer of the part code. When we first started with MFI, we did not have any Brandt, Gorenje or Smeg communication (nor Masterpart Technical 😉 ) to recognise that these codes belonged to these manufacturers.

Regards Andy

[ANDYVIVO]

Re: Brandt Dishwasher Element

We can supply, currently out of stock, £32.82 @ Masterpart.

Regards Andy

[ANDYVIVO]

Re: not getting anywhere on finding these parts??.

oh and Gorenje produced some of the earlier Iceline refrigeration.

[Author]

Posts