[atheling]

Was sent this configuration procedure for Falcon range induction hob. May be of help to someone who tries to replace the control indicator board! I’ve not tried it as using iron pans on that side rather than steel bottomed only ones helped restore more control… See pics next post!

[atheling]

Thanks Dave. It’s the board that has the knob setting indicator numbers on it ‘hob indicator unit’ pcb I think it’s called. Identical EGO number to old one. What other ways on other hobs allow you to configure? No buttons, just knobs.
Fault on the hob is that often the 2 LH rings won’t turn down to lower settings from high power. Moving the pan can trigger the lower setting to come on. The numbers showing are correct, just not the power level. Changed the energy regulators but no difference so trying this board.

[atheling]

Fixed clicking by replacing the switches or ”energy regulators’. Had to dismantle the glass top, rings shelf, metal separator shelf before gaining access. Easy after sussing access.
Oddly the 2 LH rings are controllable if we use 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} iron pans and not the cheaper sort with steel bases only…

[Author]

Posts