barryfast

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 69 total)
1 2 3 4 5
  • Author
    Posts
  • January 24, 2012 at 11:02 pm in reply to: Help. My Beko washing machine is stuck on wash cycle. #367701
    barryfast
    Participant

    Re: Help. My Beko washing machine is stuck on wash cycle.

    check the brushes or pump

    January 24, 2012 at 5:08 pm in reply to: AEG L86810 #367170
    barryfast
    Participant

    Re: AEG L86810

    Hi Martin Inspection of machine-no action. Door switch tested OK
    Continuity of pumps, water valves and heater tested OK
    Heater also megger tested. No light on display!!!!!!!!!
    Thanks Barry

    January 14, 2012 at 3:05 pm in reply to: AEG L86810 #367168
    barryfast
    Participant

    Re: AEG L86810

    Hi Martin Sorry to be a pain going out to this one next week
    dont have meny AEG to repaire in this area thanks for your help
    Barry

    December 23, 2009 at 6:40 pm in reply to: samsung P1253 #307036
    barryfast
    Participant

    Re: samsung P1253

    put one in still did it barryfast ❓

    July 11, 2009 at 2:28 pm in reply to: hotpoint dishwasher sdw60 #290539
    barryfast
    Participant

    Re: hotpoint dishwasher sdw60

    Hi thank’s for that will give it a go Barry

    July 7, 2009 at 8:14 am in reply to: hotpoint dishwasher sdw60 #290537
    barryfast
    Participant

    Re: hotpoint dishwasher sdw60

    hi Martin sorry to be so long coming back it is a holiday cottage no one in
    the Delicate LED is flashing stops at rinses Thanks Barry

    June 3, 2009 at 12:48 pm in reply to: wd 420 #288247
    barryfast
    Participant

    Re: wd 420

    hi have you checked filter for slow draining or intermittent pump fault Barry

    May 11, 2009 at 8:48 am in reply to: siemens hob #286281
    barryfast
    Participant

    Re: siemens hob

    Hi thanks for that I’ll go for for it Barry

    April 1, 2009 at 5:23 pm in reply to: Beko WMA520W #281727
    barryfast
    Participant

    Re: Beko WMA520W

    Hi i have put them back with silicon to stop it vibrating it acts as a cushion
    put plenty on it did not come off with me see how you go Barry

    January 18, 2009 at 3:47 pm in reply to: Diplomat D/W ADP8224 #272446
    barryfast
    Participant

    Re: Diplomat D/W ADP8224

    Hi sorry to take so long to come back but the customer has been away
    yes it stops at p3 it is a program on the D/W it is not a fault code or is it
    Barry

    December 7, 2007 at 10:42 pm in reply to: Eurolec builtin oven emf60ssx #236458
    barryfast
    Participant

    Re: Eurolec builtin oven emf60ssx

    thanks Chris sorry for mess up PABL ❓ Barryfast

    December 6, 2007 at 9:16 pm in reply to: LG WASHINGMACHINE WM1480FHD #208571
    barryfast
    Participant

    Re: LG WASHINGMACHINE WM1480FHD

    Hi went to one today ! same fault was not the module i tried that got on to
    LG tec they told me motor stator fault wen i fit it i will come back to let you know barryfast

    November 25, 2007 at 2:30 pm in reply to: Hotpoint WF620 #235333
    barryfast
    Participant

    Re: Hotpoint WF620

    Thanks for that you confirmed my thoughts what next are indesit getting up to the mind boggles thanks Barry 😆

    March 9, 2007 at 4:33 pm in reply to: BAUMATIC DW BDF 62W #205726
    barryfast
    Participant

    Re: BAUMATIC DW BDF 62W

    Hi Chris. sorry for the long delay the d/w heater is ok there is a stat at the back right side of the appliance next to the heater this is open curcuit
    the timer stops at quaterpast and again at twenty two the customer said that the water gets teped ❓ thank’s Barry

    March 1, 2007 at 9:43 pm in reply to: BAUMATIC DW BDF 62W #205725
    barryfast
    Participant

    Re: BAUMATIC DW BDF 62W

    sorry been away i will get back Barry

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 69 total)
1 2 3 4 5